Engineered wood, also called composite wood, man-made wood, or manufactured board, includes a range of derivative wood products which are manufactured by binding or fixing the strands, particles, fibres, or veneers or boards of wood, together with adhesives, or other methods of fixation to form composite materials. These products are engineered to precise design specifications which are tested to meet national or international standards. Engineered wood products are used in a variety of applications, from home construction to commercial buildings to industrial products. The products can be used for joists and beams that replace steel in many building projects.

Technical Specifications

Width :	125/135/190
Length :	1200/1800
Sizes :	125x1200/1800/14mm/15mm

Installation

Before installing a engineered wood wooden flooring, same preparation steps mentioned above, including underlayment and laying out spacers to maintain the expansion gap specified.

Step 1 :

install the first row using wood glue on all plank ends, arranged with the tongue facing the center of the room.

Step 2 :

When installing additional rows, work from left to right. Apply wood glue to the tongue and groove seams, then connect the pieces, carefully folding and tapping the new piece to rest on the subfloor. Immediately wipe up any glue that squeezes through the boards.

Step 3 :

Measure from board to wall and subtract the expansion gap to know the correct cut for the last row of boards. Then, insert the last row of flooring, taking care to leave the proper extension gap between the last piece and the wall.

Step 4 :

Remove the painter’s tape after 8-10 hours, but avoid heavy foot traffic and furniture placement for 24 hours.

Step 5 :

Once your new floor is complete, install transition pieces and remove the spacers. Then nail the baseboards and shoe mouldings to the wall, not the floor.

Product Features